Orthodontics – Taking The Next Step

It is common for an individual to feel discomfort and pain when wearing braces. After all, this device provides force and pressure to the teeth, which are the main sources of distressing sensations. Thankfully, orthodontics has taken the step to the next level which eliminates the worries of feeling pain during the procedure. To further attain the results, here are some tools and diagnostic equipment which an orthodontist Spokane uses today.


Placing the brackets have to be done accurately. However, this can be hindered due to some factors like overlapping gums. By using the OrthoCAD IQ, the accuracy of installing the brackets can greatly be improved.

Typically, the orthodontist acquires an impression of the patient’s oral cavity with dental casts. This impression is sent to the laboratory and will be converted to a 3D model. After thorough examination, the best area to place the brackets will be determined. With enough assessment and with the brackets installed on the most suitable spots, the treatment process will be greatly shortened whilst still attaining the best results.

I-CAT Imaging

The typical CT scan is undoubtedly a great way to visualize the patient’s jaws and teeth. The downside to this approach is the radiation, which can be risky to the patient’s health. Fortunately, this drawback has been eliminated with the use of I-CAT imaging. The I-CAT is a digital imaging type that acquires a complete picture of the teeth and jaws. Not only does it provide accuracy but the level of radiation emitted is dramatically lessened as well.

Getting the whole picture of the jaws and teeth is not the only benefit it possesses. It also procures valuable information about the facial bones, the condition of the two jaws and detection of potential problems related to the TMJ and bones.

I-CAT Imaging also enables the pictures to be viewed on the internet. With this method, an orthodontist Spokane can make customized braces, which can grant accurate results.

Temporary Anchorage Devices (TAD)

TADs are also called mini-orthoscrews. This device is utilized to properly hold the wire in the right place, thus, improving the accuracy of the movement of the teeth.

Usually, an orthodontist takes advantage of TADs when the patient has missing teeth or the bones are not sufficient to hold the wires installed. Even under extreme force delivered by the wires, it is assured that these screws will perfectly stay in their proper position. This enables the teeth to move back to the right place at a faster rate. Once the treatment process has been completed, the TADs will be removed without any hassles.

  • Facebook
  • Twitter
  • YouTube
  • Pinterest